Participants on what they loved about the Courses at AuxEn

"The elaborate way in which all kinds of cases was discussed . The patience in dealing with queries is very much appreciated. Above all, the technical knowledge that was offered is above engineering degree courses, this course went into the minute details of structural analysis"

Er Nirie-e Nisa (after attending RCC Liquid Retaining Structure course)

"Overall I love all the classes I have taken through AuxEn. The instructor was very knowledgeable, worked at a good pace, and most importantly, was very good at communicating with all the attendees and ensuring questions were answered. I would definitely recommend to others and I hope to have the opportunity to attend more training classes with AuxEn"

Er Parikshit Ghadia (after attending RCC Liquid Retaining Structure course) 

"Topic of the course was quite unique"

Er Mohammed Atif Nawaz (after attending RCC Liquid Retaining Structure course) 

"Every topic of water tank is well explained"

Er DJ Pranaya (after attending RCC Liquid Retaining Structure course) 

"You explain everything in simple and better way"

Er Akarsh Rastogi (after attending RCC Liquid Retaining Structure course)

"Going over the concept details"

Er Aneri Sheth (after attending RCC Building Design course)

"The instructor focuses on getting the concepts clear before moving to the software"

Er Mohd Farhan (after attending RCC Building Design course)

"Good Communication and explanation of all the topics during all the lectures and  awesome address of all the questions at the end of every session"

Er Karan Chudasma (after attending RCC Building Design course)

"Sir and  Ma'am  are friendly to clear our silliest  doubt, Ty both, I feel  lucky that I joined this course and my  doubts are cleared  which  I had"

Er Megha Dhongadi (after attending RCC Building Design course) 

"Dedication, enthusiasm in teaching and sharing knowledge" 

Er Chalapati Shreenath (after attending RCC Building Design course) 

"Tutor is always prepared and to the point and has answered each and every question"

Er Safdar Ahmad Wani (after attending RCC Building Design course) 

"I loved that the design was taught from the scratch by covering the reason behind different design concepts. It gave more clarity than just following the design procedure"

Er Snehal B Biradar (after attending Structural Design on MS-Excel course) 

"Systematic way of preparation of sheets"

Er Yogita Sharma (after attending Structural Design on MS-Excel course) 

"This course introduces use of excel for designing structure elements to me as i was not aware of this earlier. Also learning use of excel for designing and preparing BOQ helps in getting idea about the project"

Er Nishtha Patidar (after attending Structural Design on MS-Excel course) 

"Cleared all the basic concept on preparation of excel sheets and also cleared all the theoretical fundamentals related to subject "

Er Fatima Bhajjuwala (after attending Structural Design on MS-Excel course) 

"The way of teaching perfectly matches with the learner's requirement, so the bonding made to understand easily"

Er Mohamed Rameez (after attending Structural Design on MS-Excel course) 

"Excel is really powerful software i get to know after attending this session"

Er Suryansh Verma (after attending Structural Design on MS-Excel course) 

"Theoretical as well as practical part explained very well"

Er Keshav Pandit (after attending Virtual Design Center-PEB Shed course) 

"The images and sketches shown cleared the concepts of components. And the load combination was clear to me after the session"

Er Pooja Pavithran (after attending Virtual Design Center-PEB Shed course) 

"Each and Everything was Industrial Oriented"

Er Manjunath Makari (after attending Virtual Design Center-PEB Shed course) 

"Teaching style and methodology really nice "

Dr Vinubhai Patel(after attending Virtual Design Center-PEB Shed course) 

"EVERYTHING"

Er Rohit Kalra (after attending Virtual Design Center-RCC Building course) 

"Was Simplicity"

Er Bhavesh Harish Madhuri Kothari  (after attending Virtual Design Center-RCC Building course)

"The way you cleared the structural engineering concepts"

Er Praful NK (after attending Virtual Design Center-RCC Building course) 

"We can learn these courses from anywhere and anytime as per our convenience" 

Er Seeta Kumawat (after attending Virtual Design Center-RCC Building course) 

"Your way to take each and every things very seriously"

Er Deepak Jain (after attending Virtual Design Center-RCC Building course)  

"Easy to understand teaching style and interactive sessions. No one was discouraged to ask even a silly doubt. Sir motivated us to think and ask questions"

Er Kartik Gupta (after attending Virtual Design Center-RCC Building course)  

"I loved the way all things were taught starting from very basic level which makes even a student understand the concept"

Er Saksham Gupta (after attending Virtual Design Center-RCC Building course)  

"Design via software is never taught in college, so learning foundation design in software gives me an upper hand"

Er Ishita Kalsi (after attending course on design of Foundation Systems)  

"Design of eccentric Footing with raft type and pile type was too good. Concept of 2 piles for eccentric Footing was awesome" 

Er Yogita Sharma (after attending course on design of Foundation Systems)  

"We can ask any questions during the class and queries are sorted out"

Er Satish Parmar (after attending course on design of Foundation Systems)  

"The Case studies and Geotechnical Investigation Reports "

Dr Shikha Saxena (after attending course on design of Foundation Systems)  

"I am so thankful to  Ashutosh Sir and Aakansha Mam  for shairing his immense knowledge with us"

Er Aniket (after attending course on design of RCC Building for Earthquake Load)   

"I loved the topic itself. Because nobody focuses on IS-13920 while doing BTech or MTech also"

Er Shardul Patkar (after attending course on design of RCC Building for Earthquake Load)   

"The way you went deep into each & every Formula/Concept from code & explained the same beautifully" 

Er Arthur Thomas (after attending course on design of RCC Building for Earthquake Load) 

"Very Conceptual Teaching, which is not taught at college level"

Er Yogita Sharma (after attending course on design of RCC Building for Earthquake Load) 

"We just love the way you teach every concept"

Er Shradha Sachin Waman(after attending course on Structural Steel Building) 

"Never felt that , it was online course. Too fluent as that of offline course ; practical aspects covered"  

Er Aniruddha Shivaji Khot (after attending course on Structural Steel Building) 

"Lecture was conducted in a very simple and easy understanding language and lectures were slow and proper paced considering the doubts a fresher would face. And the way sir listened and cleared doubts"

Er Pooja Pavithran (after attending course on Structural Steel Building) 

"Team's response regarding query's is very wonderful. I can say mentor's response during class is amazing, it was too much responsive then actual class room. I could not imagine that we can get each and every response of queries during virtual class but Team AuxEn has ability to do this"

Er Satyendra Singh (after attending course on Structural Steel Building) 

"Highly informative and wholesome "

Er Vaibhav Taranekar (after attending course on Structural Steel Building) 

"Well organised and very useful course for beginners like me. This course exceeded my expectations!!  What impressed me the most about this course is the quality of teaching. Ashutosh sir has explained both, depth and breadth of the each topics, which were covered in the course. Specially practical tips on actual design model"

Er Parishit Gadhia (after attending course on Horizontal Systems) 

"Your teaching technique. You understand the thought process of a student and always there for solving the queries"

Er Pranav Sapre (after attending course on Horizontal Systems) 

"I love the details that i haven't learned from my graduation and post graduation i take admission in civil engineering in 2013 from that day to now.  In this course i learned many things and able to enhance my knowledge that makes me feel proud"

Er Mohammad Farhan Shaikh (after attending course on Horizontal Systems) 

"Concepts were taught so well  that although i didn't like RCC earlier,  I have now gained interest in it. Software design is indeed very interesting"

Er Ishita Kalsi (after attending course on Horizontal Systems) 

"The best part of your training is your coordination with your wife"

Er Lakshmi Subhash (after attending course on Flat Slab Systems) 

"The best thing in your session is that session start from very basic then reached to the ultimate level so that we clearly understand each and every topics, and also I think this is the first time that i learn manual design concept along with software, no one explain manual design like you"

Er Vikas Mourya (after attending course on Flat Slab Systems)

"One thing that I loved in the course was understanding hands on manual calculations along with learning the software"

Er Sagar Shrivastava (after attending course on Flat Slab Systems)

"Design work done from live projects"

Er Suryansh Verma (after attending course on Flat Slab Systems)

"The sincerity of the instructor. They answered all the doubts of all the participants no matter how long it took. I've never seen that anywhere!"

Er Nausheen Akhtar (after attending course on Flat Slab Systems)

"Patience and will to deliver quality content it helped me understand a lot about flat slab"

Er Yash Mandaviya (after attending course on Flat Slab Systems)

"The recorded videos were very helpful since I was not able to attend many of the classes"

Er Saritha GR (after attending course on Plate Girder and PEB Systems)

"Your passion towards teaching"

Er Rahul Brijpuriya (after attending course on Plate Girder and PEB Systems)  

"Solved all theoretical and practical problems faced by a new site engineer and also structural engineer at the time of design"

Er Akash P Pawar (after attending course on Plate Girder and PEB Systems)  

"The teaching method is fantastic. Faculty has a very good knowledge and rich industrial experience. The sessions are very interactive"

Er Bennet A Ipe (after attending course on Plate Girder and PEB Systems)